Floor Warming System Specifications and Accessories

Floor Warming Specifications

SmartRooms Floor Warming system is a factory fabricated electrical heating system. It consists of a high quality alloy resistance wire electrically insulated with a UL recognized TEFZEL® compound, temperature rated for 200°C. A factory made waterproof splice is used to connect each non-heating lead to the resistance wire. The complete heating element will have a stainless steel braid covering woven over the entire length. The heating element shall produce two watts per linear foot when energized on design voltage.

SmartRooms Floor Warming system is controlled by our SmartRoom Comfort Controller with a sensing device located under the floor covering and between to heating cables.

The SmartRooms Floor Warming System shall be installed according to the latest edition of the manufacturer's instructions.

FLOOR WARMING SYSTEM
COVERAGE (FT2)
VOLTAGE
WATTS
AMPS
CATALOGUE #
2"
2 & 3"
3"
1215171201401.2FW12-120
1823271202151.8FW18-120
2329341202752.3FW23-120
3645541204403.7FW36-120
4151611205004.2FW41-120
5265781206255.2FW52-120
6581981207856.5FW65-120
75941131209007.5FW75-120
8410512512010008.3FW84-120
1215182401500.6FW12-240
2329352402801.2FW23-240
3645542404301.8FW36-240
4658692405502.3FW46-240
6581982407803.3FW65-240
821031232409904.1FW82-240
10413015624012505.2FW104-240
11714617524014005.8FW117-240
13416820024016006.7FW134-240
15018822524018007.5FW150-240
16720925024020008.3FW167-240
18423027524022009.2FW184-240

Accessories

Note: All Floor Warming models ship with a floor sensor that works with a SmartRooms Controller

Spacing Strip(25 ft/7.6 m)
SR-LV-BSmartRooms Comfort Controller low voltage complete with face sensor (used with SRDP2)
SR-240/120 FloorSmartRooms Comfort Controller 120/240 volt complete with face sensor and preset for Floor Warming applications
SR SensorReplacement floor sensor for SmartRooms Comfort Controller (15 ft/4.5m)