Radiant Ceilings Specifications and Accessories

Specifications

SmartRooms Radiant Ceiling System is fabricated by Therma-Ray Incorporated. It is installed between the joists or furring strips. Heating panels consist of a high quality alloy resistance wire embedded in one-half inch thick gypsum board and electrically insulated with a UL recognized TEFZELŪ compound, temperature rated for 200°C.

The SmartRooms Radiant Ceiling System is CSA certified. All installations are in compliance with manufacturer's instructions and to the applicable codes or regulations of all authorities having jurisdiction. The system is controlled by our SmartRooms Comfort Controller.

Catalogue # Watts Length Width Weight (lbs)
RC8A-130-240 130 8 9 12
RC6A-095-240 95 6 9 9
RC4A-070-240 70 4 9 6

RC9B-195-240 195 9 12 18
RC8B-175-240 175 8 12 16
RC7B-150-240 150 7 12 14
RC6B-130-240 130 6 12 12
RC5B-150-240 105 5 12 10
RC4B-085-240 85 4 12 8
RC3B-070-240 70 3 12 6

RC10C-325-240 325 10 18 30
RC8C-260-240 260 8 18 24
RC6C-195-240 195 6 18 18
RC5C-160-240 160 5 18 15
RC4C-130-240 130 4 18 12
RC3C-095-240 95 3 18 9
RC2C-070-240 70 2 18 6

Accessories

PC-1 Endcap
3M567 Connector for #12 wire
S400 Strapping 400 ft spool
SR-LV SmartRooms Comfort Controller low voltage complete with face sensor
SR-240/120 SmartRooms Comfort Controller 120/240 volt complete with face sensor and power module
SRDP SmartRooms Distribution Panel for SR-LV Comfort Controllers (ask us for specific configuration details)